Controlling Method Of Warming Temperature; How To Operate My Mode Function; Change Of Temperature - Cuckoo CRP-AH10 Fuzzy Series Operating Instructions Manual

TO KEEP COOKED RICE WARM AND TASTY

Controlling method of warming temperature

If the temperature in the oven is not proper, it will smell bad and the color of the rice will change
so make sure to adjust the temperature.
Press "Mode" button over
1 time during warming. It displays
as picture with buzzer. At the time,
means current warming
temperature.
"Menu/Selection" button will blink, and
"Mode", "Set" and "Cancel" buttons will be
turned ON.
Note: The reference temperature programmed when the
product is shipped may differ from the Instruction.

Change of temperature

If you want to change cooking temperature in the standby mode, press "Mode select" button over
2 seconds, and press it 2 more times. You can change cooking temperature.

How to operate My Mode function.

Use it while opening the lid when there is too much water or rice becomes too soft.
In standby mode, push the
"mode" button 4times.
The voice says that it is
programmed warming
mode, control the
temperature you want.
1. If too much water is spilled out when you open the lid :
2. If the edge of rice is too soft :
To raise temperature
To lower temperature
Press "Menu/Selection" button to raise the setting mode.
Press "Menu/Selection" button to reduce the setting mode.
-1 Press "Menu/Selection" button to
change the temperature as
"Set" button will blink, and "Mode", "Menu/selection"
and "Cancel" button will be turned ON.
To switch the functions continuously, keep pressing
the button.
After setting temperature, press "Mode"
select button. Preset temperature will be
stored with buzzer sound. (If will be
cancelled once press "Cancel" button or
after 7 seconds without pressing any
button)
-2 Press "Menu/Selection" button to change
the temperature as
"Set" button will blink and "Model", "Menu/Selection" and
"Cancel" buttons will be turned ON.
To switch the functions continuously, keep pressing the
button.
-1 Press "Menu/Selection" button to change as the
picture (up)
"Set" button will blink, and "Mode", "Menu selection" and
"Cancel" button will be turned ON.
To switch the functions continuously, keep pressing the button.
Select the menu you want, then the press the "Mode"
button and set-up time will be automatically entered with
a buzzer. (If you press the "Cancel" button or do not
press a button within 7 seconds, the function will be
cancelled and returned to standby mode.)
-2 Press "Menu/Selection" button as the picture (down)
"Set" button will blink and "Model", "Menu/Selection" and "Cancel"
buttons will be turned ON.
To switch the functions continuously, keep pressing the button.