Mitsubishi AJ65BT-64RD3 User Manual page 57

5. PROGRAMMING
AJ65BT-64RD status check
Initial setting
Initial setting change
Initial setting change
イ イ イ イ イ 設設変変
* The program within the dotted frame is necessary only when the initial setting is changed.
5-14
MELSEC-A
SB head number setting
"B" setting
B0 setting
512 points setting
SW head number setting
"W" setting
W0 setting
256 points setting
Dedicated instruction (RRPA)
Master module head I/O No.
Parameter storage head
device
Reads data link status.
AJ65BT-64RD
data link normal
AJ65BT-64RD
data link abnormal
CH. 1 sampling processing/
travel average processing
designation flag (RY04)
CH. 2 sampling processing
/travel average processing
designation flag (RY05)
Offset/gain value
selection flag (RY77)
Turns ON initial data
processing completion
flag (RY78).
Turns OFF initial data
processing completion
flag (RY78).
CH. 1 sampling processing/
travel average processing
designation flag (RY04)
CH. 2 sampling processing
/travel average processing
designation flag (RY05)
Offset/gain value
selection flag (RY77)
Turns ON initial data
setting request flag (RY79).
Turns OFF initial data
setting request flag (RY79).