Table of Contents
Advertisement
5. PROGRAMMING
[Usage in combination with other remote device stations]
(1) Depending on the remote device stations to be used, the program enclosed by the dotted line 1)
has two programming patterns as shown in the above and the below figures.
(To check which pattern can be used, refer to the manual for the remote device to be used.)
[System configuration]
[Corrected program]
Master station
Remote device
station3
RX(p+1)B
RX(p+1)8
• RX(p+1)B and RX(q+1)B are remote READY.
• RX(p+1)8 and RX(q+1)8 are initial data processing request flags.
Remote device
station4
RX(q+1)B
RX(q+1)8
5-9
MELSEC-A
Advertisement
Table of Contents
