Table of Contents
Advertisement
[Wiring Precautions]
Do not install the control lines or communication cables together with the main circuit lines or power cables.
Failure to do so may result in malfunction due to noise.
When disconnecting the cable from the module, do not pull the cable by the cable part.
Loosen the screws of connector before disconnecting the cable.
Failure to do so may result in damage to the module or cable or malfunction due to poor contact.
[Startup and Maintenance Precautions]
Do not touch any terminal while power is on.
Doing so may cause malfunction.
Shut off the external power supply for the system in all phases before cleaning the module or retightening
the terminal screws.
Failure to do so may cause the module to fail or malfunction.
Undertightening the terminal screws can cause short circuit or malfunction.
Overtightening can damage the screw and/or module, resulting in drop, short circuit, or malfunction.
Do not disassemble or modify the modules.
Doing so may cause failure, malfunction, injury, or a fire.
Do not drop or apply strong shock to the module.
Doing so may damage the module.
After the first use of the product, do not mount/remove the terminal block to/from the module more than 50
times. (IEC 61131-2 compliant)
Shut off the external power supply for the system in all phases before mounting or removing the module to
or from the panel.
Failure to do so may cause the module to fail or malfunction.
Do not remove or change the platinum temperature-measuring resistor designation pin while energizing the
module.
If a platinum temperature-measuring resistor designation pin is removed or changed while energizing, it may
cause failure or malfunction.
Before handling the module, touch a grounded metal object to discharge the static electricity from the
human body.
Failure to do so may cause the module to fail or malfunction.
[Disposal Precautions]
When disposing of this product, treat it as an industrial waste.
CAUTION
CAUTION
CAUTION
Advertisement
Table of Contents
