Yamaha RX-V461 Owner's Manual page 28

Optimizing the speaker setting for your listening room
Press G ENTER to display the setup results
6
in detail.
7
Press G l / h repeatedly to toggle between
the setup result displays.
Results of the speaker
connection and wiring
Results of the speaker
distance from the
listening position
Results of the speaker
size
Results of the speaker
output level
y
If you are not satisfied with the results or want to manually
adjust each parameter, run "MANUAL SETUP" (see
page 49).
Note
The distances displayed in the "DISTANCE" results may be
longer than the actual distance depending on the
characteristics of your speakers.
Press G ENTER to return to the
8
"AUTO:RESULT" display.
AUTO:RESULT
NO WARNING
RESULT
SP
DIST:
LVL :
.
>
SET
[ ]/[ ]:Up/Down
[ENTER]:Enter
26
En
: 3/2/0.1
3.2/3.5m
-2/+2dB
CANCEL
9
Make sure the pointer is pointing at "SET"
and "CANCEL" and then press G l / h to
select "SET" or "CANCEL".
Choices: SET, CANCEL
• Select "SET" to confirm the "AUTO SETUP"
results.
• Select "CANCEL" to cancel the "AUTO SETUP"
results.
Press G ENTER to confirm your selection.
10
The top "SET MENU" display appears in the OSD.
SET MENU
TOP MENU
. ;AUTO SETUP
;MANUAL SETUP
.A;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
Press Q MENU to exit from "SET MENU".
11
12
Disconnect the optimizer microphone from
this unit.
The optimizer microphone is sensitive to heat. Keep it
away from direct sunlight and do not place it on top
of this unit.
y
If you change speakers, speaker positions, or the layout of
your listening environment, run "AUTO SETUP" again to
recalibrate your system.