Specifications - Stihl HLA 65 Instruction Manual

Hide thumbs Also See for HLA 65:
Table of Contents

Advertisement

Specifications

Battery
Type:
Lithium-ion
Designation:
AP, AR
The machine may be operated only with
original STIHL AP and AR rechargeable
batteries.
Power tool running time is dependent on
the energy content of the battery.
Cutting Blade
Cutting length:
500 mm
(20 in)
Tooth spacing:
33 mm
(1.3 in)
Stroke rate:
3,000/min
Sharpening angle to
horizontal:
45°
Weight
without battery, with cutting blade,
without blade scabbard
HLA 65:
3.5 kg
(7.7 lbs)
HLA 85:
4.4 kg
(9.7 lbs)
Noise and Vibration Data
Noise and vibration data are determined
on the basis of the rated maximum
speed.
HLA 65, HLA 85
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib/
Sound pressure level L
to ISO 22868
p
HLA 65:
85 dB(A)
HLA 85:
75 dB(A)
Sound power level L
to ISO 22868
w
HLA 65:
94 dB(A)
HLA 85:
94 dB(A)
Vibration measurement a
hv
ISO 22867
HLA 65:
Left handle:
3.5 m/s
Right handle:
3.5 m/s
HLA 85:
Left handle:
2.0 m/s
Right handle:
2.0 m/s
The K-factor in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration measurement.
The vibration values quoted above have
been measured according to a
standardized test procedure and may be
used to compare electric power tools.
Depending on the type of usage, the
vibrations that actually occur may differ
from the values quoted.
The vibration values quoted may be
used for an initial assessment of the
user's exposure to vibrations.
The actual exposure to vibrations has to
be evaluated. This process may also
take into account times during which the
electric power tool is switched off and
times during which it is switched on but
running without load.
Transport
STIHL batteries fulfill the requirements
stated in UN-Manual
ST/SG/AC.10/11/Rev.5 Part III,
Subsection 38.3.
to
The user can transport STIHL batteries
by road transport to the place where the
machine is to be used without additional
requirements.
2
2
The lithium ion batteries included are
subject to the provisions of the
legislation relating to dangerous goods.
2
When shipped by a third party (e. g. air
2
transport or haulage firm), special
packaging and identification
requirements must be observed.
When preparing the item for shipment, a
dangerous goods expert must be
2
consulted. Please observe any further
national regulations.
Pack the battery so that it cannot move
inside the packaging.
Further transport instructions - see
www.stihl.com/safety-data-sheets
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
English
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hla 85

Table of Contents