HP 5900 Series Configuration Manual page 44

Hide thumbs Also See for 5900 Series:

Command reference manual (364 pages)

Configuration manual (190 pages)

Compliance and safety manual (59 pages)

Table Of Contents

Table of Contents

[Sysname-irf-port4/1] port group interface ten-gigabitethernet 4/0/45

[Sysname-irf-port4/1] port group interface ten-gigabitethernet 4/0/46

[Sysname-irf-port4/1] quit

# Bind Ten-GigabitEthernet 4/0/47 and Ten-GigabitEthernet 4/0/48 to IRF-port 4/2.

[Sysname] irf-port 4/2

[Sysname-irf-port4/2] port group interface ten-gigabitethernet 4/0/47

[Sysname-irf-port4/2] port group interface ten-gigabitethernet 4/0/48

[Sysname-irf-port4/2] quit

# Bring up the SFP+ ports and save the configuration.

[Sysname] interface range name irf

[Sysname-if-range-irf] undo shutdown

[Sysname-if-range-irf] quit

[Sysname] save

# Activate the IRF port configuration.

[Sysname] irf-port-configuration active

Device D reboots to join the IRF fabric. A four-chassis IRF fabric is formed.

Configure BFD MAD on the IRF fabric:

# Create VLAN 3, and add Ten-GigabitEthernet 1/0/1, Ten-GigabitEthernet 2/0/1,

Ten-GigabitEthernet 3/0/1, and Ten-GigabitEthernet 4/0/1 to VLAN 3.

[Sysname] vlan 3

[Sysname-vlan3] port ten-gigabitethernet 1/0/1 ten-gigabitethernet 2/0/1

ten-gigabitethernet 3/0/1 ten-gigabitethernet 4/0/1

[Sysname-vlan3] quit

# Create VLAN-interface 3 and configure a MAD IP address for each member device on the VLAN

interface.

[Sysname] interface vlan-interface 3

[Sysname-Vlan-interface3] mad bfd enable

[Sysname-Vlan-interface3] mad ip address 192.168.2.1 24 member 1

[Sysname-Vlan-interface3] mad ip address 192.168.2.2 24 member 2

[Sysname-Vlan-interface3] mad ip address 192.168.2.3 24 member 3

[Sysname-Vlan-interface3] mad ip address 192.168.2.4 24 member 4

[Sysname-Vlan-interface3] quit

# Disable the spanning tree feature on Ten-GigabitEthernet 1/0/1, Ten-GigabitEthernet 2/0/1,

Ten-GigabitEthernet 3/0/1, and Ten-GigabitEthernet 4/0/1.

[Sysname] interface ten-gigabitethernet 1/0/1

[Sysname-Ten-GigabitEthernet1/0/1] undo stp enable

[Sysname-Ten-GigabitEthernet1/0/1] quit

[Sysname] interface ten-gigabitethernet 2/0/1

[Sysname-Ten-GigabitEthernet2/0/1] undo stp enable

[Sysname-Ten-GigabitEthernet2/0/1] quit

[Sysname] interface ten-gigabitethernet 3/0/1

[Sysname-Ten-GigabitEthernet3/0/1] undo stp enable

[Sysname-Ten-GigabitEthernet3/0/1] quit

[Sysname] interface ten-gigabitethernet 4/0/1

[Sysname-Ten-GigabitEthernet4/0/1] undo stp enable

Configure Device E as the intermediate device:

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

This manual is also suitable for:

5920 series

HP 5900 Series Configuration Manual page 44

Hide quick links:

Related Manuals for HP 5900 Series

Related Products for HP 5900 Series

This manual is also suitable for:

Table of Contents