HP 5900 Series Configuration Manual page 39

Hide thumbs Also See for 5900 Series:

Command reference manual (364 pages)

Configuration manual (190 pages)

Compliance and safety manual (59 pages)

Table Of Contents

Table of Contents

[Sysname-irf-port4/1] port group interface ten-gigabitethernet 4/0/46

[Sysname-irf-port4/1] quit

# Bind Ten-GigabitEthernet 4/0/47 and Ten-GigabitEthernet 4/0/48 to IRF-port 4/2.

[Sysname] irf-port 4/2

[Sysname-irf-port4/2] port group interface ten-gigabitethernet 4/0/47

[Sysname-irf-port4/2] port group interface ten-gigabitethernet 4/0/48

[Sysname-irf-port4/2] quit

# Bring up the SFP+ ports and save the configuration.

[Sysname] interface range name irf

[Sysname-if-range-irf] undo shutdown

[Sysname-if-range-irf] quit

[Sysname] save

# Activate the IRF port configuration.

[Sysname] irf-port-configuration active

Device D reboots to join the IRF fabric. A four-chassis IRF fabric is formed.

Configure LACP MAD on the IRF fabric:

# Set the domain ID of the IRF fabric to 1.

<Sysname> system-view

[Sysname] irf domain 1

# Create a dynamic aggregate interface and enable LACP MAD.

[Sysname] interface bridge-aggregation 2

[Sysname-Bridge-Aggregation2] link-aggregation mode dynamic

[Sysname-Bridge-Aggregation2] mad enable

You need to assign a domain ID (range: 0-4294967295)

[Current domain is: 1]:

The assigned

Info: MAD LACP only enable on dynamic aggregation interface.

[Sysname-Bridge-Aggregation2] quit

# Assign Ten-GigabitEthernet 1/0/2, Ten-GigabitEthernet 2/0/1, Ten-GigabitEthernet 3/0/2,

and Ten-GigabitEthernet 4/0/1 to the aggregate interface.

[Sysname] interface ten-gigabitethernet 1/0/2

[Sysname-Ten-GigabitEthernet1/0/2] port link-aggregation group 2

[Sysname-Ten-GigabitEthernet1/0/2] quit

[Sysname] interface ten-gigabitethernet 2/0/1

[Sysname-Ten-GigabitEthernet2/0/1] port link-aggregation group 2

[Sysname-Ten-GigabitEthernet2/0/1] quit

[Sysname] interface ten-gigabitethernet 3/0/2

[Sysname-Ten-GigabitEthernet3/0/2] port link-aggregation group 2

[Sysname-Ten-GigabitEthernet3/0/2] quit

[Sysname] interface ten-gigabitethernet 4/0/1

[Sysname-Ten-GigabitEthernet4/0/1] port link-aggregation group 2

[Sysname-Ten-GigabitEthernet4/0/1] quit

Configure Device E as the intermediate device:

domain ID is: 1

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

This manual is also suitable for:

5920 series

HP 5900 Series Configuration Manual page 39

Hide quick links:

Related Manuals for HP 5900 Series

Related Products for HP 5900 Series

This manual is also suitable for:

Table of Contents