Configuring Bfd Mad - HP 5900 Series Configuration Manual

Use dynamic link aggregation mode. MAD is LACP dependent. Even though LACP MAD can be
•
configured on both static and dynamic aggregate interfaces, it takes effect only on dynamic
aggregate interfaces.
• Configure link aggregation settings on the intermediate device.
To configure LACP MAD:
Step
1. Enter system view.
2. Assign a domain ID to the IRF
fabric.
3. Create an aggregate
interface and enter
aggregate interface view.
4. Configure the aggregation
group to operate in dynamic
aggregation mode.
5. Enable LACP MAD.
6. Return to system view.
7. Enter Ethernet interface view
or interface range view.
8. Assign the Ethernet port or
the range of Ethernet ports to
the specified aggregation
group.

Configuring BFD MAD

When you use BFD MAD, follow these guidelines:
You cannot enable BFD MAD on VLAN-interface 1.
•
• Do not use the BFD MAD VLAN for any other purpose. No Layer 2 or Layer 3 features, including
ARP and LACP, can work on the BFD MAD-enabled VLAN interface or any port in the VLAN. If you
Command
system-view
irf domain domain-id
interface bridge-aggregation
interface-number
link-aggregation mode dynamic
mad enable
quit
•
Enter interface range view:
Approach 1:
interface range { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5>
Approach 2:
interface range name name
[ interface { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5> ]
•
Enter Ethernet interface view:
interface interface-type
interface-number
port link-aggregation group number
25
Remarks
N/A
The default IRF domain ID is 0.
Perform this step also on the
intermediate device.
By default, an aggregation
group operates in static
aggregation mode.
Perform this step also on the
intermediate device.
By default, LACP MAD is
disabled.
N/A
To assign a range of ports to the
aggregation group, enter
interface range view.
To assign one port to the
aggregation group, enter
Ethernet interface view.
Multichassis link aggregation is
allowed.
Perform this step also on the
intermediate device.