Installing The Memory - IBASE Technology IB831-NB User Manual

INSTALLATION

Installing the Memory

The IB831 board supports one DDR3 memory socket for a maximum
total memory of 2GB in DDR3 memory type.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and
perform the following steps:
1. Hold the DDR3 module so that the key of the DDR3 module aligns
with those on the memory slot.
2. Gently push the DDR3 module in an upright position until the clips of
the slot close to hold the DDR3 module in place when the DDR3
module touches the bottom of the slot.
3. To remove the DDR3 module, press the clips with both hands.
6 IB831 User's Manual