IBASE Technology IB831-NB User Manual page 26

INSTALLATION
}
//---------------------------------------------------------------------------
unsigned char Dio3GetInput(void)
{
}
//---------------------------------------------------------------------------
void Dio3SetDirection(unsigned char NewData)
{
}
//---------------------------------------------------------------------------
unsigned char Dio3GetDirection(void)
{
}
//---------------------------------------------------------------------------
Filename：W627DHG.cpp
//---------------------------------------------------------------------------
//
// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY
// KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR
// PURPOSE.
//
//---------------------------------------------------------------------------
#include "W627DHG.H"
#include <dos.h>
//---------------------------------------------------------------------------
unsigned int W627DHG_BASE;
void Unlock_W627DHG (void);
void Lock_W627DHG (void);
//---------------------------------------------------------------------------
unsigned int Init_W627DHG(void)
{
unsigned int result;
unsigned char ucDid;
W627DHG_BASE = 0x4E;
result = W627DHG_BASE;
ucDid = Get_W627DHG_Reg(0x20);
if (ucDid == 0xA0)
{
else if (ucDid == 0xB0)
{
W627DHG_BASE = 0x2E;
result = W627DHG_BASE;
ucDid = Get_W627DHG_Reg(0x20);
if (ucDid == 0xA0)
{
else if (ucDid == 0xB0)
{
22
Set_W627DHG_LD(0x09);
Set_W627DHG_Reg(0xF1, NewData);
unsigned char result;
Set_W627DHG_LD(0x09);
result = Get_W627DHG_Reg(0xF1);
return (result);
//NewData : 1 for input, 0 for output
Set_W627DHG_LD(0x09);
Set_W627DHG_Reg(0xF0, NewData);
unsigned char result;
Set_W627DHG_LD(0x09);
result = Get_W627DHG_Reg(0xF0);
return (result);
goto Init_Finish; }
//W83627DHG-P??
goto Init_Finish; }
goto Init_Finish; }
//W83627DHG-P??
goto Init_Finish; }
IB831 User's Manual