Security Settings - IBASE Technology IB831-NB User Manual

BIOS SETUP

Security Settings

This setting comes with two options set the system password. Supervisor
Password sets a password that will be used to protect the system and Setup
utility. User Password sets a password that will be used exclusively on the
system. To specify a password, highlight the type you want and press
<Enter>. The Enter Password: message prompts on the screen. Type the
password and press <Enter>. The system confirms your password by
asking you to type it again. After setting a password, the screen
automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are prompted
to enter the password. A message will confirm the password to be
disabled. Once the password is disabled, the system will boot and you can
enter Setup freely.
Main Advanced
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
Boot Sector Virus Protection [Disabled]
40
BIOS SETUP UTILITY
PCIPnP Boot
: Not Installed
: Not Installed
IB831 User's Manual
Security
Chipset
Install or Change the
Password.
<- Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Exit