Sachs Bikes madass Repair Instructions page 143

CLUTCH/GEARSHIFT LINKAGE
Install the clutch center guide (1) and primary drive gear (2)
onto the crankshaft.
1
2
Install the clutch assembly (3).
3
NOTE
4
Install a new lock washer (4).
Install the plain washer (5) with the "OUTSIDE" mark facing
out.
5
Hold the clutch outer with the clutch outer holder.
Tighten the lock nut (6) with the lock nut wrench and extension
6
bar.
TOOL:
Crownnut wrench P14649941920000
7
TORQUE: 40-45 Nm
Bend the tab (7) of the lock washer up against the groove in
the lock nut.
140