Gearshift Linkage Disassembly; Gearshift Linkage Assembly - Sachs Bikes madass Repair Instructions

CLUTCH/GEARSHIFT LINKAGE
GEARSHIFT LINKAGE
2
DISASSEMBLY
Remove the bolt (1), drum Stopper arm (2) and spring (3).
1
3
Remove the gearshift pedal.
4
Hold the gearshift spindle claw (4) down and pull out the
gear shift spindle (5).
5
Remove the stopper plate bolt (6) and the plate (7).
6
7
ASSEMBLY
2
Install the gearshift linkage in the reverse order of removal.
NOTE
Align the holes (1) in the stopper plate with the dowel pins (2).
1
136