ESAB LAW 510 Service Manual page 5

TC1
Control power supply transformer for LAW with 400- - 415V mains voltage.
TC1
Control power supply transformer for LAW with 230- - 500V mains voltage.
TM1 Main transformer. Connection instructions for the LAW 400/500 and
LAW 410/510 with 230 - - 500 V mains connection are on page 38.
V1- - V6
Thyristor module. See the fault- - tracing instructions on page 26 and the
fitting instructions on page 33.
V7
LED, yellow. Lights to indicate operation of the thermal cutouts.
XS1 Connector, 23- -pole. For connection to/from the wire feed unit.
XS2- - XS4
Main welding current contact, single- - pole.
XS5- - XS8
Sleeve contacts
XS9 4- -pole contact. Only on the LAW 500/510.
XS10- - XS15
Sleeve contacts
XT1
9- -pole terminal block. Only on machines with 230 - - 500 V mains
connection. See the connection instructions on page 38.
XT2 3- -pole terminal block.
Z1- - Z6
RC filter.
claw0de1
claw0e06
claw0e05
- - 5 - -