Auto Reception (Fax Only Mode) - Konica Minolta bizhub 600 User Manual

Reception
4.2

Auto Reception (FAX Only Mode)

When using the telephone line for fax use only, select this mode. When the
set number of rings are detected, fax messages are received automatically.
During reception, the word [Receiving] is displayed in the screen message
area.
!
Detail
When the [RX Display] is set to [OFF], the message is not displayed.
This mode is activated when Receive mode is set to Auto RX in Telephone
Line Settings of Utility Mode.
!
Detail
Refer to "Telephone Line Settings" on page 11-25 for information about
setting this mode.
Refer to "Telephone Line Settings" on page 11-25 for information about
setting the number of rings before reception.
Arrival of a call
Starts receiving message automatically
bizhub 750/600
4
Received
Document
4-3