Konica Minolta bizhub 600 User Manual page 33

2
No. Name
8 [Reset] key
9 [Interrupt] key
10 [Stop] key
11 [Start] key
12 Main Power indicator
13 Data indicator
14 [Proof Copy] key
15 Keypad
16 [C] (clear) key
17 [Mode Check] key
18 [Utility/Counter] key
19 [Mode Memory] key
20 Contrast dial
21 [Enlarge Display] key
22 [Accessibility] key
23 [Help] key
2-4
Description
Press to clear all settings (except programmed set-
tings) entered in the control panel and touch panel.
Press to enter Interrupt mode.
While the machine is in Interrupt mode, the indicator
on the [Interrupt] key lights up in green and the
message "Now in Interrupt mode." appears on the
touch panel. To cancel Interrupt mode, press the
[Interrupt] key again.
Stops reading the original.
Press to start the operation that is selected Box mode,
Fax mode, Scan mode or Copy mode. While in Fax
mode, fax transmission is started.
When this machine is ready to begin operation, the in-
dicator on the [Start] key lights up in green. If the indi-
cator on the [Start] key lights up in orange, operation
cannot begin.
Lights up in green when the machine is turned on with
the main power switch.
Flashes in green while a print job is being received.
Lights up in green while a print job is queued to be
printed or while it is printing.
Not used for Fax mode.
Use to type in the number. Use to type in the telephone
numbers and various set values.
Press to erase a value entered using the keypad.
Press to display screens showing the specified set-
tings.
Press to display the Meter Count screen and the Utility
screen.
Not used for Fax mode.
Use to adjust the contrast of the touch panel.
Not used for Fax mode.
Press to display the screen for specifying user acces-
sibility functions.
Press to display the Help Main Menu screen, where
descriptions of the various functions and details of op-
erations can be displayed. For details, refer to User's
Guide (Copy Operations).
Before Use
bizhub 750/600