Konica Minolta bizhub 600 User Manual page 90

Transmission
– "Hour" and "minute" of the time to start communication are dis-
played in the 24-hour style, and entered in two digits.
– For example: To set the time to start communication at 9:07 p.m.,
input "21" and "07."
– To release the setting, press [OFF].
5
Press [OK].
You return to the Comm. Setting screen.
6
Press [OK].
You return to the FAX screen.
7
Set other functions if necessary.
– See "Setting Transmission Conditions" on page 3-10 for informa-
tion about setting functions in the FAX screen. See "Opening the
Scan Setting Screen and Comm. Setting screen" on page 7-2 for
information about setting functions in the FAX Application screen.
8
Designate the destination(s).
– For details, see "Selecting One Destination" on page 3-19.
9
Set the original document.
– For details, see "Placing Originals on the Platen Glass" on
page 3-6.
10
Press [Start].
The FK-502 reads the document and holds it in memory until the spec-
ified time when transmission starts.
!
Detail
To cancel transmission, see "Canceling Transmission" on page 3-32.
If the destination is not ready to receive, your call will be redialed. For in-
formation about redialing, see "Manual Redialing" on page 3-27.
If transmission fails, see "Cannot Send Messages" on page 5-2.
bizhub 750/600
3
3-39