Panasonic AW-RP555N Operating Instructions Manual page 7

Parts and their functions
 AWC button
When the WHITE BAL [A] button or [B] button has
been selected, press the AWC button to automatically
adjust the white balance and enter the adjustment in the
camera's memory A or memory B.
While the white balance is being adjusted, the AWC
button's lamp flashes; when it has been adjusted properly,
it goes off. It comes on when it was not possible to
perform the adjustment.
 This function does not work if the MODE button
has been set to BAR (the MODE button's lamp is
lighted) or if ATW has been selected.
 It may not be possible to adjust the white balance if
there is no white object on the screen being shot.
 When using a pan/tilt head other than the
AW-PH350, AW-PH360 or AW-PH650, the button's
lamp also goes off when the white balance has not
been adjusted properly.
 ABC button
This is used to automatically adjust camera's black
balance in the pan/tilt head system currently selected.
Set the IRIS [AUTO/MANU] button to AUTO (the IRIS
button is now lighted), and press the ABC button.
While the black balance is being adjusted, the ABC
button's lamp flashes; when it has been adjusted properly,
it goes off. It comes on when it was not possible to
perform the adjustment.
 No operations are performed when the MODE
button has been set to BAR (the MODE button's
lamp is lighted).
 When using a pan/tilt head other than the
AW-PH350, AW-PH360 or AW-PH650, the button's
lamp also goes off when the black balance has not
been adjusted properly.
WHT BAL SCENE FILE
AUTO
AWC
GAIN
MANU A
OPERATE
USER
0dB
L
MODE H
B 1
NG
CAM
ON
BAR
OK
CONT
CAM
ABC 2
SHUTTER
ATW
ON
OFF
3
OFF
TALLY PRESET
2 3 4 5
1 2 3 4
CONTROL
1 2 3 4 5
6 7 8 9
LEVEL IRIS
MEMORY
AUTO
MANU
SPEED ZOOM FOCUS
TELE FAR
LOW
HIGH
WIDE NEAR
 SCENE FILE [USER/1/2/3] buttons
 MENU/ , ITEM/ , YES/ , NO/
 TALLY lamps [1] to [5]
7
Multi Hybrid Control Panel AW-RP555
MENU
MENU ITEM YES NO
DEF WIP H/F
5
(AF)
EXT ND OP
10
LAMP
PAN/TILT
UP
LEFT RIGHT
DOWN
These are used to select the SCENE FILE of the camera
in the pan/tilt head system currently selected.
The lamp of the selected SCENE FILE button lights.
[In the case of the AW-E350, AW-E650, AW-E655,
AW-E750 and AW-E860]
When the [USER] button's lamp lights, the user mode is
selected.
When the [1] lamp lights, the halogen mode is selected.
When the [2] lamp lights, the fluorescent light mode is
selected.
When the [3] lamp lights, the outdoor mode is selected.
These are used to display the on-screen menus of the
camera in the pan/tilt head system currently selected so
that the settings can be performed on the menus.
When the MENU/ button is pressed for at least two
seconds, the menu mode is established, the on-screen
menus are displayed in the camera video output, and the
MENU/ button lamp lights.
If the MENU/ button is pressed for at least two seconds
in the menu mode, the menu mode is exited, the
on-screen menus in the camera video output are cleared,
and the MENU/ button lamp goes off.
For more details, refer to the "Setting and changing the
camera menu items" (page 25).
When tally signals are input to TALLY connectors [1]
through [5], the lamps with the numbers corresponding to
the connectors come on.
buttons