Grease Filters - Miele DA 5330 D Operating And Installation Instructions

Important for appliances with
lacquered housing
(special order finish)
It is very difficult to clean this type of
surface without causing minor marks to
the surface material. This can become
particularly noticeable with darker
colours and if there is halogen lighting
in the kitchen.
Controls
The controls may suffer
discolouration or damage if soiling is
left on them for too long.
Remove soiling straight away.
Observe the General notes on cleaning
earlier in this section.
Do not use stainless steel cleaning
agents on the controls.

Grease filters

The re-usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
cooker hood.
The grease filters should be cleaned
regularly (at least every 3-4 weeks) to
avoid a build-up of fat but always clean
them as soon as one of the grease filter
touch control lamps comes on.
All the grease filters must then be
cleaned.
Cleaning and care
An oversaturated filter is a fire
hazard.
If cover panels are fitted as an optional
extra, these need to be removed first.
^ To do this, disengage them from their
catches.
^ See the notes under "Housing" for
how to clean the cover panels. Like
the grease filters, they can be
cleaned in the dishwasher.
^ To take out the grease filters, release
the locking clip on the filters, lower
the filters 45°, unhook them at the
back and remove them.
To avoid damaging the filters or the
hob below, make sure you hold the
filters securely at all times when
handling them.
19