Filter Operating Hours Counter - Miele DA 5330 D Operating And Installation Instructions

Operation

Filter operating hours counter

The number of hours the appliance has
been in operation is stored in memory.
The operating hours counter tells you
when the grease filters need to be
cleaned.
Resetting the grease filter operating
hours counter
After 30 hours of operation (or another
time if the operating hours counter has
been altered), one of the two grease
filter indicator lamps will light up.
All the grease filters must then be
cleaned.
After cleaning and replacing the grease
filters, the grease filter operating
counter must be reset.
^ To do this, while the fan is switched
on, press and hold the grease filter
control until only the first of the – / +
indicator lamps is flashing.
^ The grease filter counter on the other
set of controls must also be reset in
the same way, even if this operating
hours counter has not yet reached its
maximum.
16
Reading the grease filter operating
hours counter
To check the percentage of time set
already used:
^ Press the On/Off control to switch the
fan on.
^ Press and hold the grease filter
control.
One or more of the indicator lamps for
the – /+ controls will flash.
The number of flashing lamps shows
the percentage of the operating time
which has already been used up.
1 lamp = 25 %
2 lamps = 50 %
3 lamps = 75 %
4 lamps = 100 %
The number of operating hours used
remains in the memory, even when the
appliance is switched off or there is a
power cut.