Canon MG5700 series Online Manual page 454

• When copying starts in the copy menu that is not available with the specified setting, The specified
function is not available with current settings. is displayed on the LCD. Change the setting,
following the on-screen instructions.
1. Magnif. (Magnification)
Specify the reduction/enlargement method.
Reducing/Enlarging Copies
2. Intensity
Specify the intensity. When Auto is selected, the intensity is adjusted automatically according to the
originals loaded on the platen glass. Auto is displayed on the Copy standby screen.
3. Page size
Select the page size of the loaded paper.
4. Type (Media type)
Select the media type of the loaded paper.
5. Print qlty (Print quality)
Adjust print quality according to the original.
Important
• If you use Draft with Type set to Plain paper and the quality is not as good as expected, select
Standard or High for Print qlty and try copying again.
• Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays
instead of black or white.
6. Layout
Select the layout.
Copying Two Pages onto Single Page
Copying Four Pages onto Single Page
7. 2-sidedPrintSetting
Select whether to perform two-sided copying.
454