Sms Commands For Etm350C/450C Router - ETM ETM450C User Manual

Page 22 of 24

SMS Commands for ETM350C/450C Router

SMS Command
DSR.REBOOT
DSR.NETINFO
DSR.SIM=X
DSR.SIM=X,APN,ID,PASSWORD,
Authentication,Dialup Number
Note:
Above SMS commands are case sensitive and your phone number must be in the units phone
1.
book
Action
When received by the router
the unit will respond via
SMS then reboot
Unit will respond with
network status, IP address
Set SIM slot to 1 or 2, where
X=1 or 2
Changes and sets SIM slot
and applicable ISP dialup
settings
For Support Contact +61-2-9956-7377
Or support@etmpacific.com.au
Typical Response
Router will reboot now.
Please wait....
SIM:1, IP:58.104.69.177,
APN:internet, ID:user,
PW:password, Auth:PAP and
CHAP, Sig:15
If X is already active then it
responds:
SIM X OK
If not the unit responds: SIM
X Switched
SIM X settings have been
changed
ETM350C ETM450C User ManualV008.docx