Wan Settings - ETM ETM450C User Manual

Page 11 of 24

WAN Settings

Mode:
SIM slot:
APN Name:
Username:
Password:
Authentication:
The unit (version1.0.38 firmware or above) supports Dual-SIM failover thereby providing
redundancy when two SIM cards are used. This feature allows for automatic failover to a
secondary service should the primary service become unavailable due to a signal problem,
incorrect programming or failure of the SIM.
Select either Modem router or Disabled. Default is Modem Router
Select either SIM1 or SIM2.
Depends on the service provider used. For example, in Australia, Telstra
has following different APN names. Please choose correct one for your
service. Default is "internet"
Username for your account if required.
Password for your account if required.
Select PAP or CHAP or both. Default is PAP & CHAP.
For Support Contact +61-2-9956-7377
Or support@etmpacific.com.au
ETM350C ETM450C User ManualV008.docx