Connections Settings - ETM ETM450C User Manual

Page 10 of 24

Connections Settings

After successfully logging in to the unit, you will see the Home page as below.
Up Time:
IMEI:
Firmware version:
Area Information:
PIN Status:
Signal level:
WAN:
LAN:
The time period that the router has been on.
ID Number of router.
Router's firmware version.
Cell station router is connecting to.
SIM PIN status.
Signal strength.
As an example -65dbM is better than -80dbm.
Indicates whether the router is connected to a network or not.
If connected, it will show the IP address that the Network has assigned to
this router, and the volume of data that has been upload/download during
the current session.
IP address of this router within local network.
For Support Contact +61-2-9956-7377
Or support@etmpacific.com.au
ETM350C ETM450C User ManualV008.docx