ETM ETM450C User Manual page 12

Page 12 of 24
Auto PIN:
Check LAN Cable:
Band:
Periodic Reset:
To choose from Disable or enable. If you choose enable, Router will enter
PIN code automatically each time router is power on.
Keep your PIN code in safe place. If it fails 3 times, the SIM card will
be blocked. You will then need to ask your service provider to give
you the PUK code to unlock the SIM.
nd
For 2 SIM, please enter the relevant settings. If the 2
different Operator, then the settings may be different.
If this option is enabled then the unit will disconnect the modem from the
carrier whenever the LAN cable is disconnected or the connected device is
inactive.
Set to Auto or choose appropriate bands. Default is Auto.
Router will be reset according to preset timer. Value is from 1-24 hours.
The default is Disable.
For Support Contact +61-2-9956-7377
Or support@etmpacific.com.au
nd
SIM is provided by
ETM350C ETM450C User ManualV008.docx