Table of Contents
Advertisement
Page 20 of 24
Administrator Settings - System
This section is to setup Router system.
Web Access:
Telnet Access:
NAT:
SMS Phone Number: If the router receives an SMS "REBOOT" message from any registered
Administrator Settings - Update
Contact ETM should a firmware upgrade be required.
Enable web access. When user needs to login Web address should be
https://192.168.0.1/home.asp
If Telnet Access is enabled, please specify which port is used
for Telnet. Default is port 23.
Default is NAT router.
phone number it will cause the router to reboot. 3 different cellular phone
numbers can be registered.
For Support Contact +61-2-9956-7377
Or support@etmpacific.com.au
ETM350C ETM450C User ManualV008.docx
Advertisement
Table of Contents
