Page 14 of 24
DMZ Configuration
If DMZ is Enabled, please enter DMZ Host IP address. Default is disabled.
Port Forwarding
If Port Forwarding is enabled, a user can connect to devices via the Router.
For example, there are 2 pieces of IP camera, Camera A with IP address 192.168.0.210 with port
2010 (preset inside of camera) and Camera B with IP address 192.168.0.211.
IP address:
Protocol:
Port Range:
Apply Changes:
You can also Delete selected IP address or Delete All.
Type in device IP address.
To choose from TCP, UDP or both.
To enter port number or range.
After Apply Changes is clicked, the setting will be added to Current Port
Forwarding Table.
For Support Contact +61-2-9956-7377
Or support@etmpacific.com.au
ETM350C ETM450C User ManualV008.docx