Sirius Satellite Radio Streamer Replay SIR-STRB1 User Manual page 5

Battery Installation
Your Boombox can operate independently of AC
power by installing 8 "D" batteries. The batteries
are bypassed automatically whenever the supplied
AC Adapter is plugged into the DC 12V jack on the
rear panel.
1. Turn the Boombox upside down to access the
battery compartment.
2. Push the battery cover latches forward and fl ip
up the battery compartment cover to the open
position
3. Insert eight 8 "D" batteries observing battery
polarity as shown, then close the cover.
Streamer Replay SIR-STRB1 User Guide
Installing the SIR-STRC1 Receiver in the SIR-
STRB1 Boombox
Place the SIR-STRC1 Receiver in the SIR-STRB1
Boombox so that the guides are lined up with the ribs
in the Boombox cradle. Push the Receiver down to
engage the connectors. Push the top of the Receiver
back until it is fl ush with the front of the Boombox. It
will lock into place. Apply power to the Boombox by
pressing the Power button; the LED indicator lights
green. If the Receiver does not turn on at the same
time, press the RED Power ON/OFF button in the
upper left corner of the it's front panel.
Removing the SIR-STRC1 Receiver From the SIR-
STRB1 Boombox
Press the EJECT button on top of the Boombox; the
Receiver will partially eject forward. Using your thumb
and forefi nger, grasp the Receiver on the sides and
pull up to disengage.
5