B
LED descriptions
Front panel LEDs
HP MSA 2040 models support small form factor (SFF) and large form factor (LFF) enclosures. The SFF
chassis, configured with 24 2.5" SFF disks, is used as a controller enclosure. The LFF chassis, configured
with 12 3.5" LFF disks, is used as either a controller enclosure or drive enclosure.
Supported drive enclosures, used for adding storage, are available in LFF or SFF chassis. The MSA 2040
6 Gb 3.5" 12-drive enclosure is the large form factor drive enclosure used for storage expansion. The HP
D2700 6 Gb enclosure, configured with 25 2.5" SFF disks, is the small form factor drive enclosure used for
storage expansion. See
MSA 2040 Array SFF enclosure
Left ear
1
2
1
Note: Integers on disks indicate drive slot numbering sequence.
LED
Description
1
Enclosure ID
2
Disk drive Online/Activity
3
Disk drive Fault/UID
4
Unit Identification (UID)
5
Heartbeat
6
Fault ID
Figure 31 LEDs: MSA 2040 Array SFF enclosure front panel
"SFF drive enclosure" (page 17)
3
4
5
6
7
8
2
3
for a description of the D2700.
9 10 11 12 13 14 15 16
Definition
Green — On
Enables you to correlate the enclosure with logical views presented
by management software. Sequential enclosure ID numbering of
controller enclosures begins with the integer 1. The enclosure ID for
an attached drive enclosure is nonzero.
See
"Disk drive LEDs" (page
See
"Disk drive LEDs" (page
Blue — Identified.
Off — Identity LED off.
Green — The enclosure is powered on with at least one power
supply operating normally.
Off — Both power supplies are off; the system is powered off.
Amber — Fault condition exists. The event has been identified, but
the problem needs attention.
Off — No fault condition exists.
17 18 19 20 21 22 23 24
4
5
6
81).
81).
Front panel LEDs
Right ear
79