Scc Unit (Vb-44181); Power Failure Transfer Unit (Vb-43703); Line Slt Adaptor (Vb-44100); Station Equipment - Panasonic ICX Technical Manual

Section 200 - General Description
Only one Built-In Voice Mail can be installed in a single cabinet. A maximum of four Built-In Voice
Mails can be installed in a system. Built-In Voice Mail and Built-In ACD cannot be installed in the
same cabinet, since they use the same flexible slots.

SCC Unit (VB-44181)

The Service Circuit Card provides enhanced service functions such as two RS232C ports (9600bps),
a Background Music input, and the external paging control.
Only one Service Circuit Card can be installed in a system.
RS232C port:
BGM input terminal:
On/Off control of the external amplifier:
Number of contacts for on/off control of external equipment:
Maximum current of control board:

Power Failure Transfer Unit (VB-43703)

The four-line power failure transfer is designed to switch outside dial tone from the telephone
company direct to a single line telephone when power is lost. The power failure transfer unit connects
four SLTs to four CO lines.

1 Line SLT Adaptor (VB-44100)

By connecting the 1 line SLT Adaptor to the DEC/8 card, you can connect an SLT instead of an
extension keyphone. One SLT can be connected to one 1 line SLT Adaptor unit.

STATION EQUIPMENT

Overview

The full line of Panasonic ICX phone systems offer a wide variety of critically acclaimed telephones.
All telephones work with all models of ICX systems.
As the user interface, the station instrument is a crucial element of the communications system. All
ICX telephones are designed to provide easy access to system features and functions. A mixture of
fixed and programmable feature keys allow the station to be specifically customized to accommodate
the needs of each user. A wide variety of telephones are offered with different combinations of
programmable keys, speakerphones, and liquid crystal displays to provide a complete solution to any
telecommunication requirement. The advanced economic design and quality manufacturing assure
longevity of the ICX system and stations, protecting the investment of the end-user.
All telephones are designed with the following features:
Key lettering is a part of the key mold, making it impossible for lettering to
fade or rub off.
Special film coating enables displays to be seen under extremely bright
lighting conditions.
Adjustable display contrast levels adapt to different lighting conditions.
Adjustable base for 3 different LCD viewing positions.
Photo optic controlled hookswitch, which extends the life of the
hookswitch.
ICX-40-200 ICX (International) issued December 1999
Chapter 2 - System Hardware
2 ports (maximum 9600bps)
1 port (with RCA jack)
One contact
5 contacts
.25mA (total charge)
27