Table of Contents
Advertisement
Setting the hob
In this section, you can find out how to set the cooker.
Setting the electric hotplate
You can set the heat setting using the hotplate knob for the
required electric hotplate.
Proceed as follows:
Set the switch for the electric hotplate anti-clockwise to a
1.
suitable heat setting between
For cooking, use a pan which has the same diameter as the
2.
electric hotplate.
When the dish has finished cooking, switch the electric
3.
hotplate off (heat setting 0).
Setting the oven
There are various ways in which you can set your oven. Here
we will explain how you can select the desired type of heating
and temperature or grill setting.
Note: We recommend preheating the oven before inserting the
food in order to avoid condensation on the oven glass.
Type of heating and temperature
Example in the picture: Top/bottom heating at 190 °C
Use the function selector to set the type of heating.
1.
Care and cleaning
With attentive care and cleaning, your hob and oven will retain
its looks and remain in good working order for a long time. We
will explain here how you should care for and clean them
correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect operation. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
and 3.
^
%
.
Heat setting
^
= lowest setting
Heat setting 3 = highest setting
Type of heating
or 1
^
Cooking
3
1
Baking
3
2
The display lights up when the hotplate is switched on.
You can turn the hotplate knob clockwise or anti-clockwise.
Use the temperature selector to set the temperature or grill
2.
setting.
The oven heats up.
Switching off the oven
Turn the function selector to the off position.
Changing the settings
The type of heating and temperature or grill setting can be
changed at any time using their respective selectors.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the hob do not use
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or stain
■
remover,
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Depends on amount
When you start cooking
During cooking, setting high or
low as required
Heating the oil, When you start
baking
During baking
11
Advertisement
Table of Contents
