Troubleshooting Table - Gorenje BCS789S22X Detailed Instructions

TROUBLESHOOTING TABLE

Problem/error
There is no response of
the sensors; the display is
frozen.
The main fuse in your home
trips often.
The oven lighting does not
work.
The pastry is underdone.
Error code is displayed:
ERRXX ...
* XX denotes the number/
code of the error.
Water is not pumped into
the steam system.
If the problems persist despite observing the advice above, call
an authorized service technician. Repair or any warranty claim
resulting from incorrect connection or use of the appliance shall
not be covered by the warranty. In this case, the user will cover the
cost of repair.
Solution
Disconnect the appliance from the power mains for a few
minutes (undo the fuse or switch off the main switch);
then, reconnect the appliance and switch it on.
Call a service technician.
The process of changing the light bulb is described in the
chapter
Cleaning and Maintenance.
There is an error in the electronic module operation.
Disconnect the appliance from the power mains for a few
minutes. Then, reconnect it and set the time of day.
If the error is still indicated, call a service technician.
Check the water level in the water tank.
Not enough water in the water tank
Make sure the tubes on the back of the water tank and
the holes are not clogged.
Before the repair, disconnect the appliance from the power mains
(by removing the fuse or by removing the plug from the wall
outlet).
65