Engine Oil; Tires - Jacobsen Tournament Cut 22 Technical Manual

Hide thumbs Also See for Tournament Cut 22:
Table of Contents

Advertisement

Available languages

Available languages

7
MAINTENANCE
7.3

ENGINE OIL ______________________________________________________________

Check the engine oil at the start of each day, before starting
the engine. If the oil level is low, remove oil filler cap and add
oil as required.
Perform initial oil change after the first 20 hours of operation.
Change oil every 100 hours thereafter.
See the engine manufacturer's Owners's Manual for
detailed service information.
After adding or changing oil, start and run engine at idle with
all drives disengaged for 30 seconds. Shut engine off. Wait
30 seconds and check oil level. Add oil to bring up to FULL
mark on dipstick.
Use only SAE 10W30 engine oils with API classification
SG.SF/CC.CD
7.4

TIRES ___________________________________________________________________

1. Keep tires properly inflated to prolong tire life. Check
pressure only when the tires are cool.
2. Use an accurate, low pressure tire gauge. 6 - 8 psi
(41.3-551. kPa)
!
Unless you have the proper training, tools and
experience, DO NOT attempt to mount a tire on a rim.
Improper mounting can produce an explosion that
may result in serious injury.
GB-20
CAUTION
Oil Filler Cap
Upper Oil Level
Figure 7A

Advertisement

Chapters

Table of Contents
loading

Table of Contents