Jacobsen Tournament Cut 22 Technical Manual
  1. Manuals
  2. Brands
  3. Jacobsen Manuals
  4. Lawn Mower
  5. tournament cut 22
  6. Technical manual
Jacobsen Tournament Cut 22 Technical Manual

Jacobsen Tournament Cut 22 Technical Manual

Hide thumbs Also See for Tournament Cut 22:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Download this manual
Technical Manual
El Manual Técnico
Tournament Cut™ 22
62291 - 4HP Honda Engine
ADVERTENCIA: Si se usa de forma incorrecta esta máquina
puede causar graves lesiones. Cualquier persona que use y mantenga esta
máquina deberá estar entrenado en su uso correcto, instruido de sus peligro
y deberá leer el manual completamente antes de tratar de instalar, operar,
ajustar o revisar la máquina.
WARNING:If incorrectly used, this machine can cause severe injury. Those who
use and maintain this machine should be trained in its proper use, warned of its
dangers and should read the entire manual before attempting to set up, operate,
adjust or service the machine.
4128650-ES

Advertisement

Chapters

Table of Contents
loading

Related Manuals for Jacobsen Tournament Cut 22

Summary of Contents for Jacobsen Tournament Cut 22

  • Page 1 4128650-ES Technical Manual El Manual Técnico Tournament Cut™ 22 62291 - 4HP Honda Engine ADVERTENCIA: Si se usa de forma incorrecta esta máquina puede causar graves lesiones. Cualquier persona que use y mantenga esta máquina deberá estar entrenado en su uso correcto, instruido de sus peligro y deberá...

  • Page 2: Table Of Contents

    To Order Parts 1. Write your full name and complete address on the 5. Send or bring the order to an authorized Textron Turf order. Care And Specialty Products Dealer. 2. Explain where and how to make shipment. 6. Inspect all shipments on receipt. If any parts are damaged or missing, file a claim with the carrier 3.

  • Page 3: Service Parts

    Suggested Stocking Guide To Keep your Equipment fully operational and productive, Textron Turf Care And Specialty Products suggests you maintain a stock of the more commonly used maintenance items. We have included part numbers for additional support materials and training aids. To order any of the following material: 3.

  • Page 4: Safety

    SAFETY SAFETY OPERATING SAFETY ______________________________________________________ WARNING EQUIPMENT OPERATED IMPROPERLY OR BY UNTRAINED PERSONNEL CAN BE DANGEROUS. Familiarize yourself with the location and proper use of all controls. Inexperienced operator’s should receive instruction from someone familiar with the equipment before being allowed to operate the machine. 1.

  • Page 5: Important Safety Notes

    Adjustments and maintenance should always be performed by a qualified technician. If additional information or service is needed, contact your Authorized Jacobsen Dealer who is kept informed of the latest methods to service this equipment and can provide prompt and efficient service. Use of other than original or authorized Jacobsen parts and Accessories will void the warranty.

  • Page 6: Specifications

    SPECIFICATIONS SPECIFICATIONS PRODUCT IDENTIFICATION_________________________________________________ 62291 ......22 in. (559 mm) Tournament Cut 22 with Honda 4.0 H.P. gasoline Vibration M/S EEC Sound engine and 9 blade reel. Product Power Always provide the serial number of the unit when ordering Arms replacement parts or requesting service information.

  • Page 7: Dimensions

    ACCESSORIES & SUPPORT LITERATURE _____________________________________ Contact your area Jacobsen Dealer for a complete listing of accessories and attachments. CAUTION: Use of other than Jacobsen authorized parts and accessories may cause personal injury or damage to the equipment and will void the warranty.

  • Page 8: Decals Decals

    DECALS DECALS DECALS _________________________________________________________________ Familiarize yourself with the decals, they are critical to the safe operation of the mower. REPLACE DAMAGED DECALS IMMEDIATELY. Vehicle Mass: CAUTION WARNING Model PGM 19 84.0 kg Model PGM 22 85.0 kg 1. Keep all shields in place. Model 518A 95.3 kg Keep Bystanders Away...

  • Page 9: Controls Icons

    CONTROLS CONTROLS ICONS ___________________________________________________________________ Choke Drive Parking Brake Fuel Neutral Gasoline WARNING Never attempt to operate the machine unless you have read this manual and know how to operate all controls correctly. Familiarize yourself with the icons shown above and what they represent. Learn the location and purpose of all the controls before operating this mower.
  • Page 10 CONTROLS E. Engine Switch – The engine switch enables and disables the ignition system. The engine switch must be in the ON position for the engine to run. Turning the engine switch to the OFF position stops the engine. F. Choke Lever - The choke lever opens and closes the choke valve in the carburetor.

  • Page 11: Operation Daily Inspection

    OPERATION OPERATION DAILY INSPECTION ________________________________________________________ 2. Check the fuel supply and crankcase oil level. All CAUTION fluids must be at the full mark. 3. Make sure the mower is adjusted to the required The daily inspection should be performed only when cutting height.

  • Page 12: Operating Procedures

    Each condition will require certain adjustments or 10. Never use your hands to clean cutting units. Use a precautions. Only use accessories and attachments brush to remove grass clippings from blades. approved by Jacobsen. Blades are extremely sharp and can cause serious injuries 4. Never...

  • Page 13: Starting/Stopping Engine

    OPERATION STARTING/STOPPING ENGINE ______________________________________________ 1. Check the fuel supply then open the fuel shut-off valve (G). a. Move the choke lever (F) to the “CLOSE” position. b. Move throttle control (B) to 1/2 throttle. Set start engine switch (E) to “ON”. 2.

  • Page 14: Transport Wheels

    OPERATION TRANSPORT WHEELS _____________________________________________________ WARNING Always stop the engine and disengage the drive levers before installing or removing the transport wheels. 1. Push and hold the kickstand against the ground then pull the mower handle back until the mower rests on the stand.

  • Page 15: Adjustments

    1. Adjustments and maintenance should always be per- 4. Do not change governor settings or overspeed the formed by a qualified technician. If proper adjustment engine. cannot be made, contact an authorized Jacobsen Dealer. REEL TO BEDKNIFE _______________________________________________________ (Pre-adjustment Check) b.

  • Page 16: Bedknife Adjuster

    ADJUSTMENTS BEDKNIFE ADJUSTER _____________________________________________________ 1. Threaded adjuster (A) is used to increase or decrease the spring load on the bedknife. Adjusting nuts (B) is used to move the bedknife to the reel or away from the reel. 2. Once the spring is totally collapsed as a result of many adjustments, and the bedknife cannot be moved.

  • Page 17: Brake

    ADJUSTMENTS BRAKE __________________________________________________________________ 1. Place control lever (J) in neutal position. 2. Adjust nuts (H) as required to remove all slack from brake cables. Figure 6E CUTTING HEIGHT _________________________________________________________ Note: Make sure the bedknife is properly adjusted before 6. Repeat Steps 4 and 5 on the opposite end of the setting the cutting height.

  • Page 18: Torque Specification

    All torque values included in these charts are approximate and are for reference only. Use of these torque values is at your sole risk. Jacobsen is not responsible for any loss, claim, or damage arising from the use of these charts.

  • Page 19: Maintenance

    Adjustment and maintenance should always be per- formed by a qualified technician. If proper adjustments Use the illustrations in the Parts Catalog as reference cannot be made, contact an Authorized Jacobsen for the disassembly and reassembly of components. Dealer. Recycle or dispose of all hazardous materials (fuel, Inspect the equipment on a regular basis, establish a lubricants, etc.) according to local, state or federal...

  • Page 20: Engine Oil

    MAINTENANCE ENGINE OIL ______________________________________________________________ Check the engine oil at the start of each day, before starting the engine. If the oil level is low, remove oil filler cap and add oil as required. Perform initial oil change after the first 20 hours of operation. Change oil every 100 hours thereafter.

  • Page 21: Backlapping And Grinding

    MAINTENANCE BACKLAPPING AND GRINDING ______________________________________________ Check for damage to the bedknife and reel blades. a. Apply lapping compound with a long handle Refer to (Section 6.2). brush along the entire length of the reel, (180 grit is recommended, Section 2.6). 1.

  • Page 22: Storage

    MAINTENANCE STORAGE________________________________________________________________ General CAUTION 1. Wash the mower thoroughly and lubricate. Repair To prevent personal injury and damage to the cutting and paint damaged or exposed metal. edges, handle the reel with extreme care. 2. Inspect the mower, tighten all hardware, replace After Storage worn or damaged components.

  • Page 23: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING GENERAL ________________________________________________________________ The troubleshooting chart below lists basic problems that may occur during start-up and operation. For more detailed information, contact your area Jacobsen Dealer. Symptoms Possible Causes Action Engine will not start. Choke in wrong position See Engine Manual...

  • Page 24: Maintenance & Lubrication Charts

    AR - As Required * Indicates initial service for new machines. Engine Oil - See Section 7.3 Excelite EP No 2 Grease, Jacobsen Part No. 4127663 (400 gram tube) III Dynamax No. 1 Grease, Jacobsen Part No. 4127662 (400 gram tube) GB-24...

  • Page 25: Lubrication Chart

    MAINTENANCE & LUBRICATION CHARTS LUBRICATION CHART______________________________________________________ Fitting Qty Description Service Interval Lubrication Type 1 Left Hand Frame No. 2 Shaft Every 8-10 Hours 1 Left Hand Frame No. 4 Shaft Every 8-10 Hours 1 Right Hand Frame No. 2 Shaft Every 8-10 Hours 1 Differential Gear Section Every 8-10 Hours...

  • Page 26: Para Hacer Pedidos De Piezas

    Para hacer pedidos de piezas 1. Escribir el nombre y dirección completos en el pedido. 5. Enviar o llevar el pedido a un Distribuidor autorizado Textron turf Care And Specialty Products. 2. Explicar a dónde y cómo hacer el envío. 6.
  • Page 27 Guía de Inventario Sugerido Para mantener el Equipo perfectamente operativo y productivo, Textron Turf Care And Specialty Products recomienda mantener un inventario de las piezas de mantenimiento usadas con más normalidad. Hemos incluido los números de piezas para ayuda adicional en los materiales e instrumentos de capacitación. Para cualquiera de los siguientes materiales: 3.

  • Page 28: Seguridad Funcionamiento Seguro

    SEGURIDAD SEGURIDAD FUNCIONAMIENTO SEGURO ________________________________________________ ADVERTENCIA EL EQUIPO MANIPULADO INCORRECTAMENTE O POR PERSONAL NO CUALIFICADO PUEDE SER PELIGROSO Familiarícese con la ubicación y la correcta utilización de todos los mandos. El operador sin experiencia debe recibir instrucciones de alguien familiarizado con el equipo antes de que se le permita manipular la máquina. 1.

  • Page 29: Avisos Importantes Sobre Seguridad

    Los ajustes y operaciones de mantenimiento siempre deberán ser realizadas por un técnico cualificado. Si necesita más información, póngase en contacto con su distribuidor Jacobsen que le informará de los métodos de mantenimiento más recientes y le proporcionará un servicio puntual y eficaz. El uso de piezas y accesorios no autorizados por Jacobsen anulará...

  • Page 30: Especificaciones

    ESPECIFICACIONES ESPECIFICACIONES IDENTIFICACION DEL PRODUCTO ___________________________________________ 62291 ......Tournament Cut 22 de 559 mm con motor Honda 2,98 kW. de gasolina Vibración M/S Potencia y carrete de 9 cuchillas. Producto sonora CEE Proporcione siempre el número de serie de la unidad Brazos cuando pida piezas de recambio o información sobre...

  • Page 31: Dimensiones

    Recogedor de hierba ........3,5 ACCESORIOS E INFORMACION DE APOYO____________________________________ Póngase en contacto con su distribuidor local Jacobsen para obtener una lista completa de accesorios y acoplamientos. PRECAUCION: La utilización de piezas y accesorios que no sean Jacobsen puede provocar heridas personales o daños al equipo y anulará...

  • Page 32: Etiquetas Etiquetas

    ETIQUETAS ETIQUETAS ETIQUETAS ______________________________________________________________ Familiarícese con las etiquetas, son críticas para la operación segura del cortacésped. CAMBIE INMEDIATAMENTE LAS ETIQUETAS DAÑADAS. Masa del vehículo: PRECAUCION ADVERTENCIA Modelo PGM 19 84,0 kg Modelo PGM 22 85,0 kg 1. Mantenga las protecciones en su Modelo 518A 95,3 kg Mantenga a las demás...

  • Page 33: Controles Iconos

    CONTROLES CONTROLES ICONOS__________________________________________________________________ Freno de Estrangulador Transmisión estacionamiento Combustible Neutra Gasolina ADVERTENCIA No opere la máquina a menos que haya leído este manual y sepa cómo operar los controles correctamente. Familiarícese con los iconos mostrados arriba y con lo que representan. Conozca la ubicación y el propósito de todos los controles antes de operar esta máquina.
  • Page 34 CONTROLES E. Interruptor del motor – Activa y desactiva el sistema de encendido. Debe estar en CONECTADO PELIGRO para que funcione el motor. En DESCONECTADO el motor se apaga. Aleje las manos y los pies de la unidad de corte para evitar cortes.

  • Page 35: Funcionamiento

    FUNCIONAMIENTO FUNCIONAMIENTO INSPECCION DIARIA _______________________________________________________ 2. Compruebe el suministro de combustible y el nivel PRECAUCION de aceite del cárter. Los líquidos deben estar al nivel máximo. La inspección diaria debe ser realizada con el motor 3. Asegúrese de ajustar el cortacésped a la altura de apagado y los líquidos fríos.

  • Page 36: Procedimientos De Funcionamiento

    Utilice sólo accesorios y herramientas aprobadas 10. Nunca limpie las unidades de corte con las manos. por Jacobsen. Utilice un cepillo para retirar los restos de hierba de los rodillos. Las cuchillas son extremadamente 4.

  • Page 37: Encendido/Apagado Del Motor

    FUNCIONAMIENTO ENCENDIDO/APAGADO DEL MOTOR _________________________________________ 1. Compruebe el suministro de combustible y abra la válvula de paso de combustible (G). a. Ponga la palanca del estrangulador (F) en la posición “CERRADO”. b. Ponga el control del acelerador (B) a medio gas. Ponga el interruptor de encendido del motor (E) en “CONECTADO”.

  • Page 38: Ruedas De Transporte

    FUNCIONAMIENTO RUEDAS DE TRANSPORTE _________________________________________________ ADVERTENCIA Pare siempre el motor y quite las palancas de transmisión antes de montar o desmontar las ruedas de transporte. 1. Empuje y sujete el soporte contra el suelo y tire del manillar del cortacésped hasta que descanse sobre el soporte.

  • Page 39: Ajustes General

    1. Los ajustes y mantenimiento deben ser siempre realizados por un técnico cualificado. Si no pueden realizarse los ajustes adecuados, póngase en contacto con un distribuidor autorizado de Jacobsen. CARRETE A CUCHILLA FIJA ________________________________________________ (Comprobación previa al ajuste) a. En condiciones secas se necesita una sepa- ración mayor para evitar la acumulación y los...

  • Page 40: Ajustador De La Cuchilla Fija

    AJUSTES AJUSTADOR DE LA CUCHILLA FIJA _________________________________________ 1. El ajustador (A) se utiliza para aumentar o disminuir la carga del muelle en la cuchilla fija. Las tuercas de ajuste (B) se utilizan para acercar o alejar la cuchilla fija al carrete. 2.

  • Page 41: Freno

    AJUSTES FRENO __________________________________________________________________ 1. Ponga la palanca de control (J) en neutra. 2. Ajuste las tuercas (H) lo necesario para eliminar la soltura de los cables del freno. Figura 6E ALTURA DE CORTE________________________________________________________ Nota: Asegúrese de que la cuchilla fija esté ajustada 6.

  • Page 42: Especificaciones Del Par De Torsión

    Los valores de par de torsión de estas tablas son aproximados y sólo sirven como referencia. La utilización de estos valores no es responsabilidad nuestra. Jacobsen no se hace responsable de ninguna pérdida, reclamación o daño surgido por la utilización de estas tablas. Tenga siempre especial cuidado al utilizar valores de par de torsión.

  • Page 43: Mantenimiento

    Mantenga los líquidos a sus niveles adecuados. MOTOR __________________________________________________________________ IMPORTANTE: Con esta máquina se adjunta un Durante el período de rodaje, Jacobsen recomienda lo manual del motor suministrado por el fabricante del siguiente: motor. Lea el manual del motor hasta familiarizarse 1.

  • Page 44: Aceite Del Motor

    MANTENIMIENTO ACEITE DEL MOTOR_______________________________________________________ Compruebe el aceite del motor al comienzo de cada jornada de trabajo antes de encender el motor. Si el nivel del aceite está bajo, quite el tapón de llenado de aceite y añada el aceite necesario. Realice el primer cambio de aceite tras las primeras 20 horas de funcionamiento.

  • Page 45: Amolado Y Afilado

    MANTENIMIENTO AMOLADO Y AFILADO _____________________________________________________ Compruebe que no haya daños en la cuchilla fija ni las a. Aplique un compuesto pulidor con un cepillo de cuchillas del carrete. Consulte la Sección 6.2. asa larga en todo el carrete (se recomienda una limadura de 180, Sección 2.6).

  • Page 46: Almacenamiento

    MANTENIMIENTO ALMACENAMIENTO _______________________________________________________ General Carrete y cuchilla fija 1. Limpie a fondo y lubrique el cortacésped. Repare y 1. Limpie a fondo el carrete y la cuchilla fija y repare y pinte el metal dañado o expuesto. pinte el metal dañado o expuesto. 2.

  • Page 47: Resolución De Problemas

    RESOLUCION DE PROBLEMAS GENERAL ________________________________________________________________ El cuadro de resolución de problemas cita problemas básicos que pueden surgir durante la puesta en marcha o el funcionamiento. Para obtener información más detallada, póngase en contacto con su distribuidor local de Jacobsen. Síntomas Causas posibles Acción...

  • Page 48: Cuadros De Mantenimiento Y Lubricacion

    * Indica mantenimiento inicial para máquinas nuevas. Aceite del motor - Ver Sección 7.3 Grasa Excelite EP No. 2, No. de pieza Jacobsen 4127663 (tubo de 400 gramos) III Grasa Dynamax No. 1, No. de pieza Jacobsen 4127662 (tubo de 400 gramos)

  • Page 49: Cuadro De Lubricación

    CUADROS DE MANTENIMIENTO Y LUBRICACION CUADRO DE LUBRICACION _________________________________________________ Accesorio Cantidad Descripción Intervalo de servicio Tipo de lubricación Eje No. 2 del bastidor izquierdo Cada 8-10 horas Eje No. 4 del bastidor izquierdo Cada 8-10 horas Eje No. 2 del bastidor derecho Cada 8-10 horas Sección del engranaje del diferencial Cada 8-10 horas...
  • Page 50 PARTS CATALOG PARTS CATALOG 10.1 TABLE OF CONTENTS _____________________________________________________ 1 ....Mower-Traction Unit Connection..... 27 2 ....Mower Frame ............. 28 3 ....Mower Gear Case ..........30 4 ....Mower Rollers and Shield ........ 32 5 ....Traction Unit Frame .......... 34 6 ....Traction Drum............ 36 7 ....Transmission.............

  • Page 51: Mower-Traction Unit Connection

    TOURNAMENT CUT 22 Serial No. All 1 Mower-Traction Unit Connection Item Part No. Qty. Description Serial Numbers/Notes Joint Assembly 4127838 • Spline Sleeve With Boss 4127839 • Spline Shaft 4127840 • Joint TBJ14SBC 4127841 • 24 Boot 250 4127842 • M4 Spring Pin 22 4127722 •...

  • Page 52: Mower Frame

    TOURNAMENT CUT™ 22 Serial No. All 2 Mower Frame 14 16 22 23...
  • Page 53 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes 4127515 Cutting Cylinder - 557 4127516 Left-hand Frame 4127624 Right-hand Frame 4127534 Mower Front Stay 603.4 4127651 Mower Stay 4127581 Bed Knife Comp Includes 43~45 4127582 • Bed Knife Mount 4127583 •...

  • Page 54: Mower Gear Case

    TOURNAMENT CUT™ 22 Serial No. All 3 Mower Gear Case 10 7...
  • Page 55 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes 4127521 32 Tooth Gear 4127531 O-ring P18 4127625 No.1 Shaft 4127626 Needle Bearing TAF212920OG 4127628 Seal DS21294 For Needle Bearing 4127629 Grease Nipple 4127630 Bearing 60032RDC3 4127631 2.3SPCC Special Metal Washer 625 4127632 M6 Bolt 16S 3-10...

  • Page 56: Mower Rollers And Shield

    TOURNAMENT CUT™ 22 Serial No. All 4 Mower Rollers and Shield 32 31...
  • Page 57 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes 4127527 M8 S Washer 4127536 Adjusting Screw 4127537 M8 Nut 4127538 Roller Adjuster 4127539 Front Roller Assembly Includes 5~11 4127540 • Grooved Roller 4127566 • Front Roller Shaft 4127567 • 1C5191P Metal Washer 1528 4127568 •...

  • Page 58: Traction Unit Frame

    TOURNAMENT CUT™ 22 Serial No. All 5 Traction Unit Frame...
  • Page 59 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes 4127667 Drum Assembly See Illustration 6 4127803 Transmission Gear Case Assembly See Illustration 7 4127818 • 2.3SPCC Metal Washer 620 4127632 • M6 Bolt 16S 4127797 Right-Hand Shaft Housing 4127760 M8 Hexagon Bolt With Holes 20 4127761 M8 Conical Spring Washer 2H...

  • Page 60: Traction Drum

    TOURNAMENT CUT™ 22 Serial No. All 6 Traction Drum...
  • Page 61 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes 4127667 Drum Assembly Includes 1~18 4127668 • Drum Left-hand Shaft 4127669 • Right-hand Drum Comp Includes 2 ~ 3 4127670 • • Right-hand Drum 4127674 • • M25.4 Bush 30.142 4127629 •...

  • Page 62: Transmission

    TOURNAMENT CUT™ 22 Serial No. All 7 Transmission...
  • Page 63 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes Transmission Gear Case Assembly Includes 2~30 4127803 • Plate With Label 4127816 • Gear Case 4127817 • Bearing 62032NSEC3 4127710 • 2.3SPCC Metal Washer 620 4127818 • M6 Bolt 16S 4127632 •...

  • Page 64: Differential

    TOURNAMENT CUT™ 22 Serial No. All 8 Differential...
  • Page 65 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes 4127737 Differential Housing Gasket 4127738 Left-hand Differential Housing 4127739 M6 Cross-head Countersunk Screw 12 4127740 Seal OS18264 for Needle Bearing 4127741 Needle Bearing TA2210Z 4127742 1C5191P Metal Washer 2230 4127743 0.8NBS55 Metal Washer 2230 4127744 Right-hand 16 Tooth Differential Gear...

  • Page 66: Left Side Gear Case

    TOURNAMENT CUT™ 22 Serial No. All 9 Left Side Gear Case 39 40 27 28...
  • Page 67 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes 4127729 Large Gasket 4127730 No.1 Shaft Gasket 4127731 No.1 Shaft Housing 4127732 Oil Seal MHS19307 4127629 Grease Nipple 4127733 No.2 Shaft 4127660 M10 Washer 4127622 M10 Conical Disk Spring H 4127623 M10 Nut 3P10H1 9-10...

  • Page 68: Right Side Gear Case

    TOURNAMENT CUT™ 22 Serial No. All 10 Right Side Gear Case...
  • Page 69 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes 4127660 M10 Washer Minimum Order of 10 10-1 10-2 4127622 M10 Conical Disk Spring H 10-3 4127623 M10 Nut 3P10H1 10-4 4127734 1C5191P Metal Washer 1322 10-5 4127735 0.8NBS55 Metal Washer 1322 10-6 4127754 Needle Bearing KTW131720...

  • Page 70: Engine And Clutch

    TOURNAMENT CUT™ 22 Serial No. All 11 Engine and Clutch Tournament™ Cut 22 CAUTION ALLOW ENGINE TOO COOL FOR 2 MINUTES BEFORE REFUELING CAUTION BE SURE THE TRACTION CLUTCH LEVER IS IN NEUTRAL BEFORE STARTING THE ENGINE. CAUTION 1. Read operators manual before operating machine.
  • Page 71 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes 446136 Lockwasher, 5/16 Heavy 11-1 11-2 443108 Nut, 5/16-24 Hex 11-3 460052 Cotter Pin, 3/16 x 1-1/2” 11-4 366800 Spring Clutch 11-5 366799 Spring Clutch 11-6 400228 Screw, 5/16-24 x 1-1/4” Hex Head 11-7 3005380 Fingers, Clutch...

  • Page 72: Handle

    TOURNAMENT CUT™ 22 Serial No. All 12 Handle To Right Brake Clutch To Left Brake Honda Engine Ignition Switch 50 Watt Rectifier Charge Magnet Coil Switch Spark Ignition Plug Coil...
  • Page 73 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes 366708 Flanged Bearing 12-1 12-2 4125847 Prawl 12-3 443110 Nut, 3/8-16 Hex 12-4 400268 Screw, 3/8-16 x 1-3/4” Hex Head 12-5 4127065 Lever, Brake 12-6 446142 Lockwasher, 3/8 Heavy 12-7 4126028 Lever, Control 12-8...

  • Page 74: Handle Mount

    M10 Conical Spring Washer 1H 13-5 4127854 2.3SPCC Metal Washer 1025 13-6 4127050 Cover, Front Handle 13-7 4127051 Cover, Back Handle 13-8 4125904 Decal, Control Lever 13-9 4124759 Decal, Jacobsen 13-10 4128662 Screw, Socket Head Cap > Change from previous revision...

  • Page 75: Tools

    TOURNAMENT CUT™ 22 Serial No. All 14 Tools Item Part No. Qty. Description Serial Numbers/Notes 4127889 Tool Bag 14-1 14-2 4127890 Bladed Screwdriver N200 14-3 4127891 Spanner 8x10 14-4 4127892 Box Spanner 7 14-5 4127893 Cylinder Grinding Handle 14-6 4127894 Cylinder Grinding Shaft 14-7 4127895...

  • Page 76: Drum Wheel Parts

    TOURNAMENT CUT™ 22 Serial No. All 15 Drum Wheel Parts 25 24 22 20...
  • Page 77 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes 4127693 Brake Drum 15-1 15-2 4127694 M8 Hollow Set Screw 10 15-3 4127696 Wheel Clamping Seat 15-4 4127697 Tyre 4.10/3.50-6 Assembly 4127704 • Tyre 4.10/3.50-6 4127705 • Wheel 3SP-6 4127706 •...

  • Page 78: Grass Catcher

    TOURNAMENT CUT™ 22 Serial No. All 16 Grass Catcher...
  • Page 79 TOURNAMENT CUT™ 22 Item Part No. Qty. Description Serial Numbers/Notes 4127868 Grass Catcher 54 Comp 16-1 16-2 4127869 Grass Catcher Attachment Piece 16-3 4127870 Stopped Cap 12.7 16-4 4127871 1C5191P Metal Washer 1728 16-5 4127872 M6 Clip Pin 16-6 4127873 Mower Attachment Piece Comp 16-7 4128282...
  • Page 80 INDEX 2811102.......35 4127540.......33 4127639 ...... 31 4127708 ...... 53 3000053.......33 4127566.......33 4127640 ...... 31 4127709 ...... 53 3001235.......33 4127567....33 4127641 ...... 31 4127710 ....39 3006127.......49 4127568....33 4127642 ..31 4127711 ...... 43 340830......47 4127569....33 4127643 ...... 31 4127712 ......
  • Page 81 INDEX 4127766....43 4127831 ...... 39 4127893 ...... 51 4127767...... 43 4127833 ...... 39 4127894 ...... 51 4127768...... 43 4127834 ...... 39 4127895 ...... 51 4127769....43 4127835 ...... 39 4127896 ...... 51 4127770....43 4127836 ...... 39 4127897 ...... 51 4127771......
  • Page 84 Equipment from Jacobsen is built to exacting standards ensured by ISO 9001 and ISO 14001 registration at all of our manufacturing locations. A worldwide dealer network and factory trained technicians backed by Textron Parts Xpress provide reliable, high-quality product support.

Table of Contents