KIP 3100 User Manual page 11

1. 4. 2 Printer
Subject
Printing method
Photoreceptor
Print speed
Print head
Resolution of print head
Print width
Print length
Warm up time
First print time
Fusing method
Development method
Media
Storage of consumables
NOTE
The above specifications are subject to change without notice.
Specification
LED Array Electro photography
Organic Photoconductive Drum
80mm per second
(Metric) -
(Inch) 6 D Landscape
LED Array
600dpi x 600dpi
Maximum 914mm or 36"
Minimum 279mm or 11" (Roll paper)
210mm or 8.5" (Cut sheet paper)
Maximum
(Standard) 6m or 19.7 feet
(Option) 24m or 75 ft
Minimum 210mm or 8.5"
NOTE
If the print is longer than 6m, image quality or the reliability of
paper feeding systems are not guaranteed.
Less than 4 minutes 30 seconds
o
(At 23 C, 60%RH, the rated voltage, and plain paper is used)
18 seconds (D Landscape)
o
(At 23 C, 60%RH, the rated voltage, and plain paper is used)
Heat and Pressure Rollers
Dry type non-magnetic mono-component toner
(Recommended Media)
Plain Paper
Tracing Paper
Film
Recommend media for electro-photography process
(Toner cartridge)
Store the cartridge within the temperature range from 0 to 35
degrees Centigrade (32 to 95 degrees Fahrenheit) and within the
humidity range from 35 to 85% RH.
1-6
18 - 24lbs
18 - 20lbs
4 MIL
Chapter 1 Before Use