Setting Library Codes - Yamaha HTR-N5060 Owner's Manual

REMOTE CONTROL FEATURES

Setting library codes

You can operate multiple YAMAHA receivers or
amplifiers in the same room with the supplied remote
control simultaneously. Set the appropriate library code to
select and operate the desired component with the
supplied remote control.
Setting remote control AMP ID library
codes
Select one of the following codes to set the remote control
AMP ID library code for the component you want to use.
1
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
2
Press the numeric buttons to enter the code
number "00001" or "00002".
The TRANSMIT indicator on the remote control
flashes twice, and the AMP ID library code is
changed.
STEREO MUSIC ENTERTAIN
1 2 3
STANDARD SELECT EXTD SUR. DIRECT ST.
5 6 7
SPEAKERS ENHANCER NIGHT STRAIGHT
9 0 10
AMP ID
library code
*1
00001 To operate this unit using
(initial setting) the default code.
To operate this unit using
00002
an alternative code.
*1
The remote control setting
*2
The setting of this unit (see page 82)
Notes
• You need to set the corresponding remote control AMP ID
of this unit in the advanced setup (see page 82).
• When using multiple YAMAHA receivers/amplifiers, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
separately.
86
En
TRANSMIT
Flashes
MOVIE
4
TRANSMIT
8
ENT. Flashes
EFFECT
Remote
Function control AMP
ID *2
ID1
(initial setting)
ID2
Setting remote control TUNER ID library
codes
Select one of the following codes to set the remote control
TUNER ID library code for the component you want to
use.
1
Press TUNER to select "TUNER" as the input
source.
2
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
3
Press the numeric buttons to enter the code
number "81916" or "81917".
The TRANSMIT indicator on the remote control
flashes twice, and the TUNER ID library code is
changed.
STEREO MUSIC ENTERTAIN
1 2 3
STANDARD SELECT EXTD SUR.
5 6 7
SPEAKERS ENHANCER NIGHT STRAIGHT
9 0 10
TUNER ID
library code
*1
81916 To operate this unit using
(initial setting) the default code.
To operate this unit using
81917
an alternative code.
*1
The remote control setting
*2
The setting of this unit (see page 82)
Notes
• You need to set the corresponding remote control TUNER
ID of this unit in the advanced setup (see page 82).
• When using multiple YAMAHA receivers/amplifiers, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
separately.
TUNER
TRANSMIT
Flashes
MOVIE
4
DIRECT ST.
TRANSMIT
8
Flashes
ENT.
EFFECT
Remote
Function control
TUNER ID *2
ID1
(initial setting)
ID2