Yamaha HTR-N5060 Owner's Manual page 81

OSD shift OSD SHIFT
Use this feature to adjust the vertical position of the OSD.
Control range: –5 (upward) to +5 (downward)
Control step: 1
Initial setting: 0
• Press j to raise the position of the OSD.
• Press i to lower the position of the OSD.
Gray back GRAY BACK
Use this feature to display a gray background in the OSD
when there is no video signal being input.
Choices: AUTO, OFF
• Select "AUTO" to display a gray background in the
OSD when there is no video signal being input.
• Select "OFF" not to display any background in the
OSD.
Notes
• Depending on the video signals being input or the system
setting of your video monitor (NTSC or PAL), the OSD may be
displayed abnormally. In such cases, set "GRAY BACK" to
"OFF".
• Even when "GRAY BACK" is set to "OFF", the OSD may not
be displayed correctly depending on the conditions of the
picture.
On-screen display time ON SCREEN
Use this feature to set the amount of time to display the
iPod menu or NET/USB menu in the OSD after you
perform a certain operation.
Choices: ON, 10s, 30s
• Select "ON" to display the OSD unceasingly during an
operation.
• Select "10s" to turn off the OSD 10 seconds after you
perform a certain operation.
• Select "30s" to turn off the OSD 30 seconds after you
perform a certain operation.
Front panel display scroll FL SCROLL
Use this feature to set whether to display the information
(such as song title or channel name) in the front panel
display in a continuous manner or by the first 14
alphanumeric characters after scrolling all characters once
when "DOCK" or "NET/USB" is selected as the input
source.
Choices: CONT, ONCE
• Select "CONT" to display the operation status in the
front panel display in a continuous manner.
• Select "ONCE" to display the operation status in the
front panel display by the first 14 alphanumeric
characters after scrolling all characters once.
Memory guard B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: OFF, ON
B)MEMORY GUARD
>OFF
[<]/[>]:Select
[ENTER]:Return
• Select "OFF" to turn off the "MEMORY GUARD"
feature.
• Select "ON" to protect:
– DSP program parameters
– all "SET MENU" items
– all speaker levels
Note
When "MEMORY GUARD" is set to "ON", you cannot select
and adjust any other "SET MENU" items.
SET MENU
ON
79
En