If you are using a CRT TV, we recommend that you use magnetically shielded speakers. • Prepare at least two speakers (for front). The priority of the other speakers is as follows: 1 Two surround speakers 2 One center speaker...
Connect and install as follows the fi rst time you use this unit. See the following explanations for the connections for each number. BD/DVD player (recorder) This unit Front speaker R Front Subwoofer speaker L Surround speaker R Center speaker...
Surround speaker Front speaker Caution: • Remove the AC power cord of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity.
Connect a TV Video input to this unit is output to a TV using output jacks of the same kind. Input Output HDMI HDMI When you have made connections using different types of video HDMI input such as HDMI and component video, make the same connection...
“SCENE” key. • If necessary, you can connect components that cannot be connected using the above methods, such as devices that output video from component video output jacks and audio from analog output jacks. Refer to Owner’s Manual for details.
• Use the following as a guide when setting speaker sizes. When you have completed the settings for one speaker, repeat the same procedure for all speakers to complete settings. Press RETURN when setting is complete.
Use Cursor D / E to select “On.” A test tone plays back from the speakers as soon as you select “On.” The test tone plays back in a clockwise fashion. Only speakers confi gured for use in procedure 5 output the test tone.
Pressing and holding this key allows you to store input sources/sound fi eld programs. Press this key when this unit is in standby mode to switch on the unit. Adjusting high/low-frequency sound (Tone control) Press TONE CONTROL to select “Treble” or “Bass.”...