Disc Or Track Title Erase; Move - Yamaha MDX-596 Owner's Manual

Disc or Track Title Erase

This operation lets you erase the title of the disc or the
title of tracks on a disc. The title of the disc can only be
erased during the stop mode, however, the title of the
track can be erased during play or stop mode. In the stop
mode, use the jog dial to select the track.
To erase a disc title
1
Press & to set this unit to stop mode.
2
Press EDIT repeatedly to display "Title
Erase?", then press ENTER.
"Disc Title" and "Erase OK?" appear alternatively in the
display.
3
Press ENTER again.
The disc title is erased and "Complete" appears
momentarily.
To erase a track title
1
Turn the jog dial to select the track with the
title you want to erase.
2
Press EDIT repeatedly to display "Title
Erase?", then press ENTER.
"Track Title" and "Erase OK?" appear alternatively in the
display.
3
Press ENTER again.
The track title is erased and "Complete" appears
momentarily.
Notes
• Note that the DISC and TRACK indicators appear in the
display when "Title Erase" is displayed to distinguish
between the two operations.
• To avoid mistakes when erasing the disc or track names,
press DISPLAY repeatedly until the title display screen
appears so that titles can be confirmed beforehand.

MOVE

This function lets you change the position of any track.
When you move tracks, all tracks are automatically
renumbered.
Example: Moving track 2 to the track number 4
1 2
Before
A B
moving
1 2
After
A C
moving
1
Turn the jog dial to select the track you want
to move.
2
Press EDIT repeatedly to display "Move ?",
then press ENTER.
3
Turn the jog dial to select the track's
destination (new track number).
Selected track
ANALOG DISC TRACK
DIGITAL TOTAL
OPT. 1 2 REMAIN
COAX.
4
Press ENTER.
"Complete" appears momentarily in the display.
3 4 5 6
C D E
3 4 5 6
D B E
Destination
E-19