Panasonic NETWORK CAMERA WV-NW502S Installation Manual page 26

n
Insert an SDHC/SD memory card.
Important:
• Before inserting an SDHC/SD memory card, turn off the power of the camera first.
Insert an SDHC/SD memory card with the label face visible (see the illustration below).
Before removing the SDHC/SD memory card, select "Not use" for "SD memory card" on the
[SD memory card] tab of "Basic" on the setup menu first. Turn off the power after "Not use"
selection, and then unload the SDHC/SD memory card. (
q Insert an SDHC/SD memory card into the
SDHC/SD memory card slot.
w Insert an SDHC/SD memory card into the
slot until it clicks into the place. When it
clicks, it is inserted into the place.
e To remove the SDHC/SD memory card,
push down the top of the card until it
clicks.
The SDHC/SD memory card will be
released and come up from the slot.
26
Operating Instructions (PDF))
Label face