Panasonic NETWORK CAMERA WV-NW502S Installation Manual page 14

Procure fixing screws separately.
The screws that secure this product are not
supplied. Prepare them according to the
material and strength of the area where the
product is to be installed.
Not remove or loosen screws
If the screws (7 pieces) on the rear of the
camera are loosened, camera trouble due to
water leakage or camera falling may occur.
Radio disturbance
When the camera is used near TV/radio
antenna, strong electric field or magnetic
field (near a motor, a transformer or a power
line), images may be distorted and noise
sound may be produced.
PoE (Power over Ethernet)
Use a PoE hub/device that is compliant with
IEEE802.3af standard.
Router
When connecting the camera to the Internet,
use a broadband router with the port for-
warding function (NAT, IP masquerade).
Refer to the Operating Instructions (PDF) for
further information about the port forwarding
function.
14