SDHC/SD
memory card slot
Monitor out connector
for adjustment
• About the [INITIAL SET] button
Turn on the power of the camera while holding down this button, and wait for around 5 seconds
without releasing this button. Wait around 2 minutes after releasing the button. The camera will
start up and the settings including the network settings will be initialized. Before initializing the
settings, it is recommended to copy down the settings in advance.
16
Tilting lock screw
MONITOR
OUT
Link LED
(Lights when the connection
is being established)
Access LED
(Blinks when accessing a network)
TOP
MONITOR
OUT
INITIAL
ABF
SET
LINK ACT
SD CARD/
ABF
INITIAL SET
button
INITIAL
ABF
SET
LINK ACT
SD CARD/
ABF
SDHC/SD memory card error LED/ABF LED
(Blinks when ABF is being performed)
Panning lock screw
Panning table
Camera fixing screw
Auto-back-focus
button