Toshiba Strata CIX Installation Manual page 29

BLF Link Setup
Program 803 Advanced Configuration > System > I/O Device > IO Logical Device
FB
00 Logical Device Number
01 Device Connection
02 Port Index No. -
Program 801 Advanced Configuration > System > I/O Device > LAN Device
LAN Port Index No. -
00
assigned. Use port assigned in above step (Program 803, FB02).
01 Protocol
02 Application Type
03 Data Flow
04 Server Port No.
05 – 08 Leave at Default values
p
00 – Choose the device port number to be assigned. Use port assigned in above step
(Program 803, FB02).
p
01 – Assign to be TCP (default).
p
02 – Assign the type to be Server (default).
p
03 – Asynchronous operation (default).
p
04 – Assign the port to be a server that is linked to the client (1100~1107 recommended).
When you complete all Strata CIX programming, be sure to enter this same port number in
"Modify TSP Configuration" on page
"1101" as the 04 Server Port No. "1101" is the LAN port for BLF numbers.
p
05 ~ FB08 and FB10 ~ FB11 – Leave at default values.
Important!
• If a DKT telephone is connected to the CIX/CTX Attendant Console PC, use the keyboard for
all PC operations when the console is running.
• When the Attendant Console software is not running, the DKT3001 telephone can be used for
regular calling. Calls intended for an Attendant when the software is not running will follow the
Alternate Destination programmed in Strata CIX/CTX. Only calls directed to the DKT's primary
extension number will ring the phone.
•
Also, if the handset interferes with the headset, you can unplug the handset while using the
headset.
Strata CIX PC Attendant Console Installation
Description
Choose the device port number to be
25. If your CIX software is version 1.3 or higher, enter
06/09
Software Installation
Set Up LAN
Setting
400 BLF
LAN
11
11
TCP
Server
Asynchronous
6000
2 17
-