Configuring Member Ports For A Smart Link Group; Configuring Role Preemption For A Smart Link Group - HP A5120 EI Configuration Manual

To do...
Create a smart link group, and
enter smart link group view
Configure protected VLANs for
the smart link group
NOTE:
The protected-vlan command configures protected VLANs for a smart link group by referencing MSTIs.
To view VLAN-to-MSTI mappings, use the display stp region-configuration command. For VLAN-to-
MSTI mapping configuration, see the

Configuring member ports for a smart link group

You can configure member ports for a smart link group either in smart link group view or in port view.
The configurations made in these two views have the same effect.
In smart link group view
Follow these steps to configure member ports for a smart link group in smart link group view:
To do...
Enter system view
Create a smart link group, and
enter smart link group view
Configure member ports for a
smart link group
In port view
Follow these steps to configure member ports for a smart link group in port view:
To do...
Enter system view
Enter Ethernet port view or layer 2
aggregate port view
Configure member ports for a
smart link group

Configuring role preemption for a smart link group

Follow these steps to configure role preemption for a smart link group:
To do...
Enter system view
Create a smart link group, and
enter smart link group view
Use the command...
smart-link group group-id
protected-vlan reference-instance
instance-id-list
Layer 2—LAN Switching Configuration Guide
Use the command...
system-view
smart-link group group-id
port interface-type interface-
number { master | slave }
Use the command...
system-view
interface interface-type interface-
number
port smart-link group group-id {
master | slave }
Use the command...
system-view
smart-link group group-id
92
Remarks
—
Required
By default, no protected VLAN is
configured for a smart link group.
.
Remarks
—
—
Required
Remarks
—
—
Required
Remarks
—
—