To do...
port group
view
Reset DLDP state
Displaying and maintaining DLDP
To do...
Display the DLDP configuration of
a port
Display the statistics on DLDP
packets passing through a port
Clear the statistics on DLDP
packets passing through a port
DLDP configuration examples
Automatically shutting down unidirectional links
Network requirements
As shown in
Configure DLDP to automatically shut down the faulty port upon detecting a unidirectional link, and
automatically bring up the port after you clear the fault.
Use the command...
Enter port group
port-group manual port-group-
view
name
dldp reset
Use the command...
display dldp [ interface-type interface-
number ] [ | { begin | exclude | include }
regular-expression ]
display dldp statistics [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
reset dldp statistics [ interface-type interface-
number ]
Figure 1
1, Device A and Device B are connected with two fiber pairs.
Remarks
Configurations made in Ethernet
port view apply to the current port
only. Configurations performed in
port group view apply to all the
ports in the port group.
Required
46
Remarks
Available in any view
Available in any view
Available in user view