Table of Contents
Advertisement
FREE STANDING OR WALL MOUNTING
STAND
Your Barometer comes with a built-in stand for tabletop
use. On the back of the unit, ease the plastic
and place the stand in the recess holds located at the
bottom of the case.
1. PUSH DOWN
2. PULL ALWAYS
GENTLY
FROM UNIT
3. PLACE THE STAND
BA112(EN)2
8
WALL MOUNT
On the back of the Barometer you'll find one
for mounting on to the wall.
whatever device you choose ) into the wall until the head
from its slot
extends a little more than 4 mm from the wall. Place your
Barometer over the screw in the hanger slot, until it locks
into place.
MAINTENANCE
The following suggestions will help you care for the
barometer so you can enjoy it for years.
1. Keep the Barometer dry. If it gets wet, wipe it dry
immediately. Liquid might contain minerals that can
corrode the electronic circuits.
2. Use and store the Barometer only in normal
temperature environments. Temperature extremes
can shorten the life of electronic devices, damage
batteries, and distort or melt plastic parts.
3. Handle the Barometer gently and carefully. Dropping
it can damage circuit boards and cause the Barometer
to work improperly.
4. Keep the Barometer away from dust and dirt, which
can cause premature wear of parts.
5. Wipe the Barometer with a damp cloth occasionally
to keep it looking new. Do not use harsh chemicals,
cleaning solvents, or strong detergents to clean the
barometer.
6. Use only fresh batteries of the required size and type.
Always remove old or weak batteries. They can leak
chemicals that can destroy electronic circuits.
8
9/28/04, 3:04 PM
recess hole
Place once screw ( or
Hide quick links:
Advertisement
Table of Contents
