LOW BATTERY WARNING
When it is time to replace batteries, the low-battery indicator will
be displayed for the selected channel.
HOW TO USE THE TABLE STAND OR WALL
MOUNTING
The main unit has a removable table stand which when
can support the unit on a flat surface. Or you can remove the stand
and
mount the unit on a wall using the recessed screw hole.
The remote sensor comes with a wall mount holder and a table stand.
Main unit
Wall-mount
M A X
T EM P
R H
M A X
1
1
Remote unit
connected
Table Stand
This button is used when the unit is operating in an unfavorable
way or malfunctioning. To return all user programmed settings to
their original factory values, press [ RESET ] by using a blunt
stylus to hold down the button.
Once batteries are placed in a given remote sensor unit, it will start
transmitting information at 40-second intervals.
For
automatically search for signals once batteries are installed. Upon
successful reception, the individual channel temperature reading
will be displayed on
reading on
its readings at about 40-second intervals.
5
Wall-mount
THE RESET BUTTON
GETTING STARTED
approximately a 3-minute duration, the main unit will
the second line
the third
line. The main unit will automatically update
Table Stand
and the respective humidity