Low Battery Signal Indication; Free Standing Or Wall Mounting; Maintenance - Oregon Scientific BA-116 Instruction Manual

LOW BATTERY SIGNAL INDICATION

If the voltage of the Batteries becomes low, the ' BATT '
indicator will be displayed. Please replace the batteries when
the ' BATT ' indicator is displayed.
FREE STANDING OR WALL
MOUNTING
Stand:
Your Barometer comes with a built-in stand for tabletop use.
On the back of the unit, ease the plastic stand from its slot and
place the stand in the recess holes on located on the bottom
of the case.
1. PUSH DOWN GENTLY. 2. PULL AWAY FROM UNIT.
3. PLACE THE STAND.
Wall Mount:
On the back of the Barometer you'll find a recess holes for
wall handing. Place a screw (or whatever device you choose)
into the wall until the head extends a little more than 4 mm
from the wall. Place your barometer over the screw in the
hanger slot, until it locks into place.

MAINTENANCE

The following suggestions will help you care for the
Barometer so you can enjoy it for years.
1. Keep the Barometer dry. If it gets wet, wipe it dry
immediately. Liquids might contain minerals that can
corrode the electronic circuits.
2. Use and store the Barometer only in norma temperature
environments. Temperature extremes can shorten
7