Low Battery Warning; How To Use The Table Stand Or Wall Mounting; The Reset Button; Getting Started - Oregon Scientific BAR182HG User Manual

LOW BATTERY WARNING

When it is time to replace batteries, the respective low-battery
indicator will show up when the respective channel is selected.
HOW TO USE THE TABLE STAND OR WALL
MOUNTING
The main unit has a removable table stand, which when connected,
can support the unit on a flat surface. Or you can remove the stand
and mount the unit on a wall using the recessed screw hole.
As for the remote unit, it comes with a wall-mount holder and a
removable stand. Use either to hold the unit in place.
Main unit
Wall-mount Table Stand
Remote unit
Wall-mount

THE RESET BUTTON

This button is only used when the unit is operating in an
unfavorable way or malfunctioning. Use a blunt stylus to hold down
the button. All settings will return to their default values.

GETTING STARTED

Once batteries are placed in a given remote sensor unit, it will start
transmitting information at 40-second intervals.
Also, for approximately a 3-minute duration, the main unit will
automatically search for signals once batteries are installed. Upon
successful reception, the individual channel temperature reading
will be displayed on the top line and the respective humidity
reading on the bottom line. The main unit will automatically update
its readings at about 40-second intervals.
If no signals are received, blanks "---" will be displayed and the
kinetic wave icon will not show.
5
Table Stand